JLG E600 Service And Maintenance Manual page 179

Configuration Digit Number
7 0
PLATFORM
ALARM 1
8 0
SOFT TOUCH
1
9 0
LOAD CELL
1
2
NOTE: The following information is to be used when working with the MACHINE SETUP menu. When configuring the
machine, the machine configuration must be completed before any personality settings can be changed. Changing
the personality settings first and then changing the model number of the machine configuration will cause the per-
sonality settings to return to default values.
Default settings will be shown in bold type.
3121813
Table 6-3. Machine Configuration Programming Information
Sounds continuously when above elevation and tilted only.
Sounds continuously when above elevation and tilted, and in conjunction with
fault code flashes (Option)
0=No Soft Touch system installed
1= Soft Touch system installed (Option)
No Load Cell Installed
Warn Only
Warn & Cutout
– JLG Lift –
SECTION 6 - JLG CONTROL SYSTEM
Description
Default
Number
0
0
0
4150342-3
6-13