Cover Disassembly - JLG E600 Service And Maintenance Manual

SECTION 3 - CHASSIS & TURNTABLE

Cover Disassembly

1. Remove O-Ring (17) from groove in Cover (6A).
2. Remove Thrust Washer (2) from Cover (6A) pockets.
3. Unscrew two Hex Head Bolts (6C) and remove Dis-
engage Cap (6B) from Cover (6A).
3-14
4. Pull Disengage Rod (6D) out from Cover (6A).
5. Use appropriate tool to remove O-ring (6E) from
6. Remove two O-Ring Pipe Plugs (6F) from Cover
2 Thrust Spacer
3A Input Carrier
6A Cover
6B Disengage Cap
6C Bolt, Hex
6D Dowel Pin
6E O-ring
6F Pipe Plug
17 O-ring
Figure 3-8. Cover Assembly
– JLG Lift –
internal groove in Cover (6A).
(6A).
3121813