JLG E600 Service And Maintenance Manual page 20

SECTION 1 - SPECIFICATIONS
2. Generator Engine (If Equipped)
Lube Point(s) - Fill Cap
Capacity - Refer to Engine Manual
Lube - EO
Interval - 3 Months or 150 hours of operation
Comments - Check level daily/Change in accor-
dance with engine manual.
3. Hydraulic Tank
Lube Point(s) - Fill Cap
Capacity -
Prior to S/N 51941 - 15 gal. tank (56.7 L)
S/N 51941 to present - 15.9 gal. system (56.7L)
12.4 gal. (46.9 L) to Full Mark
Lube - HO
Interval - Check Level daily; Change every 2 years or
1200 hours of operation.
1-6
4. Hydraulic Filter
Interval - Change after first 50 hrs. and every 6
months or 300 hrs. thereafter or as indicated by
Condition Indicator.
Comments - Under certain conditions, it may be
necessary to replace the filter on a more frequent
basis.
5. Swing Drive Hub (S/N 58845 to Present)
DRAIN
Lube Point(s) - Level/Fill Plug
Capacity - 24 oz. (0.7 L)
Lube - EPGL
Interval - Check level every 3 months or 150 hrs of
operation; change every 2 years or 1200 hours of
operation
– JLG Lift –
FILL
3121813