Torque Requirements; Major Component Weights; Serial Number Location - JLG E600 Service And Maintenance Manual

1.9 TORQUE REQUIREMENTS

Table 1-9. Torque Requirements
Description Torque Value (Dry)
Wheel Lugs 170 ft. lbs.(238 Nm)
T/T Counterweight 400 ft.lbs.(560 Nm)
Bolts
Swing Bearing Bolts 190 ft.lbs.(260 Nm)
*Check swing bearing bolts for security after first 50 hours of opera-
tion and every 600 hours thereafter. (See Swing Bearing in Section 3.)
NOTE: When maintenance becomes necessary or a fas-
tener has loosened, refer to the Torque Chart to
determine proper torque value.

1.10 MAJOR COMPONENT WEIGHTS

Table 1-10. Component Weights
Component
Frame (bare)
T/T (bare)
Boom Assembly (E/M 600)
Boom Assembly (E/M 600J)
Tire & Wheel
Swing Drive
Swing Bearing
Platform Console
Side Entry Platform - 30x72 (bare)
Side Entry Platform - 30x48 (bare)
Counterweight
Foam Fill (Filled Tires)
3121813
Interval Hours
150
A/R
50/600*
Pounds Kilograms
1381 626
2093 950
4464 2025
4464 2025
226 102.5
70 32
100 45.4
25 11
175 80
144 66
2560 1161
441 200
– JLG Lift –
SECTION 1 - SPECIFICATIONS

1.11 SERIAL NUMBER LOCATION

A serial number plate is affixed to the right side of the
frame. If the serial number plate is damaged or missing,
the machine serial number is stamped on the left side of
the frame at the top.
Figure 1-1. Serial Number Location
SERIAL NUMBER
PLATE
SERIAL NUMBER
STAMPED ON FRAME
1-3