Machine Configuration Programming Information - JLG E600 Service And Maintenance Manual

SECTION 6 - JLG CONTROL SYSTEM
6.8 MACHINE CONFIGURATION
PROGRAMMING INFORMATION
Configuration Digit Number
1 1
MODEL #
2
2
TILT SENSOR
1
2
3
4
3 0
DRIVE CUTOUT
1
2
4 0
FUNCTION
CUTOUT LIMIT 1
SWITCH
2
5 0
JIB
1
2
6 0
GROUND
ALARM 1
2
3
6-12
Table 6-3. Machine Configuration Programming Information
E600
M600
When tilted the tilt light is lit (continuously) and drive speed is reduced to the creep speed setting
5 degree - reduces the maximum speed of all platform functions to creep when tilted and
above elevation. Reduces drive speed to creep when tilted. (Domestic/Japan)
4 degree - reduces the maximum speed of all platform functions to creep when tilted and above
elevation. Reduces drive speed to creep when tilted. (European/Australian)
4 degree - cuts out drive and reduces boom functions to creep speed when tilted and above ele-
vation. Reduces drive speed to creep when tilted only. (Option)
3 degree - reduces the maximum speed of all boom functions to creep when tilted and above
elevation. Reduces drive speed to creep when tilted. (CE and Australian E600JP , M600JP)
NOTE: Any of the selections above will light the tilt lamp when a tilted condition
occurs and will sound the platform alarm when the machine is tilted
and above elevation.
Battery Charger Cutout - cuts out drive when the battery charger is plugged in
Battery Charger Cutout and Simultaneous Drive and Boom functions disabled above elevation
(European/Australian)
Battery Charger Cutout and Drive Cutout above elevation (Option)
0= No Function Cutout
1= Cuts out all boom functions when switch opens (Option)
2= Cuts out all functions when the switch opens (Option)
No jib installed
Jib installed which has up and down movements only (Option)
Jib installed which has up and down movements and side to side movements
(Option)
No ground alarm installed
Travel Alarm - Sounds when the drive function is active (Option)
Descent Alarm - Sounds when either lift down is active (Option)
Motion Alarm - Sounds when any function is active (Option)
– JLG Lift –
Description
Default
Number
1
1
0
0
0
0
3121813