Toshiba TOSVERT VF-nC3 Instruction Manual page 143

[Selection 3: Setting vector control and manual tuning independently]
If an "  " tuning error is displayed during auto-tuning or when vector control characteristics are to be
improved, set independent motor constants.
Title Function

Slip frequency gain
 Automatic torque boost value
 Motor's rated capacity

Motor rated current

Motor no-load current

Motor rated rotational speed
 Load moment of inertia ratio
Motor electronic thermal

protection level 1
*1: Depends upon the setup menu settings.
Adjustment range
0-150 (% ）
0.0-30.0 (%)
0.01-5.50 (kW)
0.1-30.0 (A)
10-90 (%)
-1
100-32000 (min )
0.1-100.0 (times)
10-100 (%) / (A)
F-39
E6581595
Default setting
50
Depends on
the capacity
(See 11.4)
*1
1.0
100
6