Toshiba TOSVERT VF-nC3 Instruction Manual page 224

• Table of output terminal functions 2
Function
No.
40
41
56
57
60
61
78
79
92
93
128
129
146
147
254
255
Note 1: Even numbers are always OFF and odd numbers are always ON since function numbers 12, 13, 18, 19,
Note 2: Function numbers are different from those on the VF-nC1. Pay attention to this when substituting
11
Code
RUN Run
RUNN Inversion of run/stop
COT Cumulative operation time alarm
COTN Inversion of cumulative operation time alarm
FR Forward/reverse run
FRN Inversion of forward/reverse run
COME RS485 communication error
COMEN Inversion of RS485 communication error
DATA Assigned data output
DATAN Inversion of assigned data output
LTA Parts replacement alarm
LTAN Inversion of parts replacement alarm
FLR Fault signal (output also at a retry)
FLRN Inversion of fault signal (output also at a retry)
AOFF Always OFF
AON Always ON
30 to 39, 42 to 55, 58, 59, 62 to 77, 80 to 91, 94 to 127, 130 to 145, and 148 to 253 are "No function
assigned."
function numbers.
Function
ON: While operation frequency is output or while
OFF: Operation stopped
Inversion of RUN
ON: Cumulative operation time is equal to or more
OFF: The cumulative operation time is less than
Inversion of COT
ON: Forward run
OFF: Reverse run
(The previous status is held while motor operation
is stopped.)
Inversion of FR
ON: Communication error occurred,
OFF: Communication normal
Inversion of COME
ON: Bit 0 of FA50 is ON.
OFF: Bit 0 of FA50 is OFF.
Inversion of DATA
ON: The parts replacement time (any one of
OFF: The parts replacement time has not been
Inversion of LTA
ON: The inverter is tripped or a retry is in
OFF: The inverter is not tripped or a retry is not in
Inversion of FLR
Always OFF
Always ON
K-20
E6581595
Action
DC braking is in operation ()
than .
.
cooling fan, control board capacitor, or main
circuit capacitor) has elapsed.
reached.
progress.
progress.