Toshiba TOSVERT VF-nC3 Instruction Manual page 32

How to install
• Do not install or operate the inverter if it is damaged or any component is missing.
Prohibited
• Mount the inverter on a metal plate.
1
• Do not operate with the front panel cover removed.
• An emergency stop device must be installed that fits with system specifications (e.g. shut off input
Mandatory
• All options used must be those specified by Toshiba.
• The main unit must be installed on a base that can bear the unit's weight.
• If braking is necessary (to hold motor shaft), install a mechanical brake.
Mandatory
(1)
Select an indoor location with good ventilation, and then install it upright on a flat metal plate.
When installing multiple inverters, leave at least 5 cm of space between each inverter and install them
aligned horizontally.
When using the inverter in locations with temperatures above 40°C, remove the caution plate (sticker) on top
of the inverter before use. Current reduction is necessary in locations that exceed 50°C.
(2)
To align the inverters side-by-side horizontally, remove the caution plate (sticker) on top of the inverter before
use.
Current reduction is necessary in locations that exceed 40 °C.
This can result in electric shock or fire. Please consult your local sales agency for repairs. Call your
local sales agency for repairs.
The rear panel gets very hot. Do not install in an inflammable object, this can result in fire.
This can result in electric shock.
power then engage mechanical brake).
Operation cannot be stopped immediately by the inverter alone, thus risking an accident or injury.
The use of any other option may result in an accident.
If the unit is installed on a base that cannot withstand that weight, the unit may fall resulting in injury.
The brake on the inverter will not function as a mechanical hold, and if used for that purpose, injury
may result.
Normal installation
Side-by-side installation
Warning
Caution
10 cm or more
VFnC3
5 cm or more
5 cm or more
10 cm or more
A-20
E6581595