Toshiba TOSVERT VF-nC3 Instruction Manual page 197

[Example of wiring]
EMC plate
DC reactor wiring (shielded cable)
9.1.3 About the low-voltage directive
The low-voltage directive provides for the safety of machines and systems. All Toshiba inverters are CE-marked
in accordance with the standard EN 50178 specified by the low-voltage directive, and can therefore be installed in
machines or systems and imported without problem to European countries.
Applicable standard: IEC61800-5-1
Pollution level: 2
Overvoltage category: 3
Power supply wiring
(shield cable)
Motor wiring (Shielded cables)
Contror wiring (Shielded cables)
I-3
E6581595
Install the shield cable after
modifying it as shown below.
Remove the covering of the cable
and fix the shield in the metal saddle.
9