Status Monitor Mode - Toshiba TOSVERT VF-nC3 Instruction Manual

Status monitor mode

The inverter can be moved through each of the modes by pressing the MODE key.
4
Status monitor mode
Monitoring of
operation status
⇒ Refer to
Section 8.2.
The mode for monitoring all inverter status.
Allows monitoring of set frequencies, output current/voltage and terminal
information.
⇒ Refer to Section 8.
Standard monitor mode
At power source on
HTH
H

Frequency setting method
⇒ See 3.2.2.

Setting monitor mode
D-2
E6581595
CWJ
How to search and set
parameters
⇒ Refer to Section 4.2.
CWH