Installing The Front Side Cowling Assembly; Removing/Installing The Front Upper Cowling - Yamaha YZF-R25 Service Manual

EAS31361
INSTALLING THE FRONT SIDE COWLING
ASSEMBLY
The following procedure applies to both of the
front side cowling assembly.
1. Install:
• Front side cowling assembly "1"
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Fit the projections "a" on the front side cowl-
ing assembly into the holes "b" in the front
cowling inner panel, slide the front side cowl-
ing assembly rearward, and then fit the por-
tion "c" of the front cowling inner panel into
the slot "d" in the front side cowling assembly.
b. Fit the projection "e" on the front side cowling
assembly into the grommet.
c
b
e
c. Install the quick fasteners, screw, bolt, and
nut, and then tighten the screw, bolt, and nut
to specification. (Left front side cowling as-
sembly)
Install the quick fastener, screw, and bolts,
and then tighten the screw and bolts to spec-
ification. (Right front side cowling assembly)
Front upper cowling bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Front side cowling screw
1.8 Nm (0.18 m·kgf, 1.3 ft·lbf)
Front upper cowling nut (left
side)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS31362
REMOVING THE FRONT UPPER COWLING
The following procedure applies to both of the
front upper cowling.
1. Remove:
• Front upper cowling "1"
TIP
Slide the front upper cowling in the direction of
the arrow shown in the illustration to remove the
projections "a" on the front side cowling "2" from
the holes "b" in the front upper cowling.
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
c
d
a
1
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
1
▼▼▼
EAS31363
INSTALLING THE FRONT UPPER COWLING
The following procedure applies to both of the
front upper cowling.
1. Install:
• Front upper cowling "1"
d
TIP
Fit the projections "a" on the front side cowling
"2" into the holes "b" in the front upper cowling,
and then slide the front upper cowling in the di-
rection of the arrow shown in the illustration.
1
▲▲▲
4-10
GENERAL CHASSIS (3)
b
Front upper cowling screw
1.8 Nm (0.18 m·kgf, 1.3 ft·lbf)
b
a
2
a
2