Yamaha YZF-R25 Service Manual page 92

7. Radiator inlet hose
8. Coolant hose
A. 13°
B. Face the white paint mark on the coolant
reservoir hose upward.
C. 40°
D. 3 mm (0.12 in) or more. Make sure not to
install the hose clamp on the raised portion of
the hose fitting.
E. Downward
F. Install the coolant reservoir hose until the end
of the hose contacts the raised portion of the
hose fitting.
G. 10 mm (0.39 in) or more
H. 5 mm (0.20 in)
I. Install the pipe up to the groove in the coolant
reservoir cap.
J. Install the coolant reservoir breather hose
completely onto the hose fitting of the coolant
reservoir.
K. Left side
L. Install the coolant hose so that the end of the
hose is positioned as shown in the illustration.
2-59
CABLE ROUTING