Cable Routing - Yamaha YZF-R25 Service Manual

3. Front brake light switch lead
4. Handlebar switch lead (right handlebar
switch)
5. Clutch cable
6. Clutch switch lead
7. Handlebar switch lead (left handlebar switch)
8. Horn
9. Main switch lead
10. Horn lead
11. Front brake hose
12. Upper bracket
13. Main switch
14. Guide
A. Route the throttle cables through the guide.
B. Route the horn lead through the guide.
C. Route the clutch cable to the front of the
throttle cables and left handlebar switch lead.
D. Route the left handlebar switch lead so that
the horn lead that branches off from the left
handlebar switch lead is routed forward.
E. Fasten the horn lead at the white tape to the
front brake hose with the plastic band.
Position the horn lead to the front of the front
brake hose. Make sure that the plastic band
contacts the pipe section of the front brake
hose.
F. The main switch lead, left handlebar switch
lead, and right handlebar switch lead may be
routed in any order.
G. Route the horn lead to the outside of the front
brake hose.
H. Route the main switch, left handlebar switch,
and right handlebar switch leads according to
instructions "J", "K", "L", and "M" in the order
listed.
I. Forward
J. Route the main switch lead between the
cable guide and the main switch.
K. Route the main switch lead through the cable
guide as shown in the illustration, making
sure to fit the lead in between the bends in the
guide.
L. Route the main switch lead back through the
cable guide so that it is looped around the
guide as shown in the illustration.
M. Route the left handlebar switch lead and right
handlebar switch lead through the guide as
shown in the illustration.
2-36

CABLE ROUTING