Yamaha YZF-R25 Service Manual page 88

A. Point the ends of the hose clamp to the left.
B. Face the yellow paint mark on the crankcase
breather hose to the left.
C. Install the hose up to the bend in the hose
fitting.
D. Make sure not to install the hose clamp on
the raised portion of the hose fitting.
E. Forward
F. Install the hose clamp as shown in the
illustration so that one end of the clamp is
pointing rearward and one end is pointing
inward.
G. 0–3 mm (0–0.12 in)
H. Connect the black connector of the fuel hose
(fuel tank to fuel rail) to the fuel rail.
I. Point the ends of the hose clamp downward.
J. Face the white paint mark on the ISC (idle
speed control) valve inlet hose to the right.
K. Point the ends of the hose clamp to the right,
angled downward.
2-55
CABLE ROUTING