Table of Contents
Advertisement
LT
2. Check:
• Front brake discs
Refer to "CHECKING THE FRONT BRAKE
DISC" on page 4-35.
3. Lubricate:
• Oil seal lips
Recommended lubricant
Lithium-soap-based grease
4. Install:
• Collars
• Front wheel
• Front wheel axle
• Front wheel axle nut
TIP
• Install the front wheel with the mark "a" on the
front tire pointing in the direction of wheel rota-
tion.
• Apply lithium-soap-based grease to the con-
tact surface and threads of the front wheel axle
nut.
a
5. Tighten:
• Front wheel axle nut
Front wheel axle nut
52 Nm (5.2 m·kgf, 38 ft·lbf)
ECA14140
NOTICE
Before tightening the wheel axle nut, push
down hard on the handlebar(s) several times
and check if the front fork rebounds smooth-
ly.
6. Install:
• Front brake caliper
• Front brake hose holder "1"
Front brake caliper bolt
35 Nm (3.5 m·kgf, 25 ft·lbf)
Front brake hose holder bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
EWA13500
WARNING
Make sure the brake hose is routed properly.
TIP
While holding the front brake hose holder so that
the portion "a" of the holder contacts the portion
"b" of the front fork, tighten the front brake hose
holder bolt.
a
1
4-23
FRONT WHEEL
b
1
Advertisement
Table of Contents
Troubleshooting
