Yamaha YZF-R25 Service Manual page 197

Hide thumbs Also See for YZF-R25:

Table of Contents

a. Install the oil flow stopper spring into the oil

flow stopper.

Make sure that the oil flow stopper spring is in-

stalled securely into the grooves "a" in the oil

flow stopper.

b. Install the damper rod ring onto the damper

Fit the damper rod ring into the damper rod

groove so that the side of the ring with the pro-

jections is facing in the direction shown in the il-

c. Install the damper rod and rebound spring to

the inner tube.

Allow the damper rod to slide slowly down the in-

ner tube until it protrudes from the bottom of the

inner tube. Be careful not to damage the inner

d. Install the oil flow stopper and inner tube

bushing onto the inner tube "6".

2. Lubricate:

• Inner tube's outer surface

• Inner tube

(in the outer tube)

• Copper washer

• Front fork damper rod bolt

• Front fork damper rod bolt "1"

While holding the damper rod assembly with the

damper rod holder "2" and T-handle "3", tighten

the front fork damper rod bolt.

Recommended oil

Yamaha fork oil 10WT

Front fork damper rod bolt

30 Nm (3.0 m·kgf, 22 ft·lbf)

Damper rod holder

T-handle 3/8" drive 60 cm long

Troubleshooting