Yamaha YZF-R25 Service Manual page 293

TIP
Install the oil pressure switch lead terminal with
the lead routed upward.
2
2. Install:
New
• O-ring "1"
• Gear position switch "2"
Gear position switch screw
3.5 Nm (0.35 m·kgf, 2.5 ft·lbf)
LOCTITE®
TIP
• Lubricate the O-ring with lithium-soap-based
grease.
• While holding the gear position switch so that
the flange "a" on the switch contacts the crank-
case, tighten the gear position switch screws.
1
1 New
a
2
2
a
5-76
CRANKCASE