Extron electronics XTP II CrossPoint 6400 Setup Manual page 48

Command
Relay controls
Turn on an endpoint relay
Turn off an endpoint relay
Toggle an endpoint relay
Pulse an endpoint relay
Example:
View an endpoint relay status
X@
NOTE: = Output number
X3$
= Relay on endpoint
X3%
= Pulse duration
X3^
= Relay status
SIS Command Response
(Host to Unit to Endpoint) (Endpoint to Unit to Host)
EX@ X3$ }
* *1RELY Rely
EX@ * X3$ *0RELY } Rely
EX@ X3$ }
* *2RELY Rely
EX@ X3$ X3% }
* *3* RELY Rely
E }
1*2*3*45RELY Rely1*2*3*45
EX@ X3$ } X3^]
* RELY
01 – 16, 32, or 64
1 or 2
0 through 65535 (each step = 16 ms, see the example above)
0 = Off
Additional Description
X@ X3$ ]
* *1
Turn on relay
X@ * X3$ *0 ]
Turn off relay
X@ X3$ ]
* *2
Toggle (on-to-off or off-to-on) relay
X@ X3$ X3%]
* *3*
Turn on relay
X3%
as . Each step of
]
Turn on relay 2 in output endpoint 1 for 720 ms
(0.72 sec,
On or off.
1 = On
X3$ X@
in output .
X3$ X@
in output .
X3$
in output
X3$ X@
in output for an interval defined
X3%
is 16 ms.
X3%
= 45 * 16 ms = 720 ms).
X@
.