Extron electronics XTP II CrossPoint 6400 Setup Manual page 3

Configurable digital video matrix switchers
Hide thumbs Also See for XTP II CrossPoint 6400:
Table of Contents

Advertisement

FCC Class A Notice
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC rules. The
Class A limits provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause interference; the user
must correct the interference at his own expense.
ATTENTION:
unshielded twisted pair (UTP) or shielded twisted pair (STP) cables;
but, to ensure FCC Class A and CE compliance, STP cables and
STP Connectors are required.
For more information on safety guidelines, regulatory compliances,
EMI/EMF compatibility, accessibility, and related topics, see the
"Extron Safety and Regulatory Compliance
website.
Class 1 Laser Product
Any service to this product must be carried out by Extron Electronics and
its qualified service personnel.
CAUTION:
NOTE:
compliances, EMI/EMF compatibility, accessibility, and related
topics, see the
on the Extron website.
Produit laser de classe 1
Si ce produit a besoin d'un quelconque entretient, celui-ci doit être fait
par Extron Electronics et son personnel qualifié.
ATTENTION :
Remarque :
sécurité, les conformités de régulation, la compatibilité EMI/EMF,
l'accessibilité, et les sujets en lien, consultez le
sécurité et de conformité
The Twisted Pair Extension technology works with
Using controls, making adjustments, or performing
procedures in a manner other than what is specified herein may
result in hazardous radiation exposure.
For more information on safety guidelines, regulatory
"Extron Safety and Regulatory Compliance
L'utilisation de commandes, la réalisation de
réglages, ou l'exécution de procédures de manière contraire aux
dispositions établies dans le présent document, présente un risque
d'exposition dangereuse aux radiations.
Pour plus d'informations sur les directives de
Guide" on the Extron
« Informations de
Extron » sur le site internet d'Extron.
Guide"

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xtp ii crosspoint 1600Xtp ii crosspoint 3200

Table of Contents