Extron electronics XTP II CrossPoint 6400 Setup Manual page 22

Switcher and XTP board LAN cables
The LAN ports require CATx, crossover or patch cables.
XTP board XTP cables
ATTENTION:
•
•
•
•
•
•
Extron recommends using the following practices to achieve full
transmission distances up to 330 feet (100 m) and reduce transmission
errors.
Use the following Extron XTP DTP 24 SF/UTP cables and connectors for
the best performance:
XTP DTP 24/1000
XTP DTP 24P/1000 Plenum 1000' (305 m) spool
XTP DTP 24 Plug
If not using XTP DTP 24 cable, at a minimum, Extron recommends
24 AWG, solid conductor, STP cable with a minimum 400 MHz bandwidth.
Terminate cables with shielded connectors to the TIA/EIA T568B
standard only (patch cables, see
Limit the use of more than two pass-through points, which may include
patch points, punch down connectors, couplers, and power injectors.
If these pass-through points are required, use CAT 6 or 6a shielded
couplers and punch down connectors.
NOTE:
following:
•
•
•
•
14 XTP II CrossPoint 1600, 3200, and 6400 • Installation
Do not connect these boards to a computer data or
telecommunications network.
Ne connectez pas ces cartes à des données informatiques ou à
un réseau de télécommunications.
Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP
cable or STP201 cable to link the XTP products.
N'utilisez pas le câble AV Skew-Free UTP version améliorée
UTP23SF d'Extron ou le câble STP201 pour relier les produits
XTP avec les émetteurs.
To ensure FCC Class A and CE compliance, STP cables and
STP connectors are required.
Afin de s'assurer de la compatibilité entre FCC Classe A et CE,
les câbles STP et les connecteurs STP sont nécessaires.
Non-Plenum 1000' (305 m) spool
Package of 10
When using cable in bundles or conduits, consider the
Do not exceed 40% fill capacity in conduits.
Do not comb the cable for the first 20 m, where cables are
straightened, aligned, and secured in tight bundles.
Loosely place cables and limit the use of tie wraps or hook and
loop fasteners.
Separate twisted pair cables from AC power cables.
figure 5
on the previous page).
22-236-03
22-235-03
101-005-02