Extron electronics XTP II CrossPoint 6400 Setup Manual page 4

Battery Notice
These products contain batteries. Do not open the unit to replace
the battery. If the battery needs replacing, return the entire unit to
Extron (for the correct address, see the Extron Warranty section on the
last page of this guide).
CAUTION:
an incorrect type. Dispose of used batteries according to the
instructions.
ATTENTION : Risque d'explosion. Ne pas remplacer la pile par le
mauvais type de pile. Débarrassez-vous des piles usagées selon le
mode d'emploi.
Conventions Used in this Guide
Notifications
The following are used:
ATTENTION:
•
•
NOTE:
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X** X3%* X3&* X3^
NOTE:
Computer responses and directory paths that do not have variables are
written in the font shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Risk of explosion. Do not replace the battery with
Risk of property damage.
Risque de dommages matériels.
A note draws attention to important information.
For commands and examples of computer or device
responses mentioned in this guide, the character " 0 " is used for
the number zero and "O" is the capital letter "o."
}
CE