Seat Ateca Owner's Manual page 113

›››
3. Turn the connector lock
direction of arrow and pull on the
1
connector.
4. Rotate the bulb holder in the direction of
arrow and extract it with the bulb.
2
5. Replace the defective bulb with a new
bulb with the same features.
6. Insert the bulb holder in the number
plate light and turn in the opposite di-
rection of arrow until it stops.
2
7. Plug the connector into the bulb holder.
Note
Depending on how equipped the vehicle is,
the number plate lights may be LEDs. LEDs
have an estimated life that exceeds than that
of the car. If a light with LEDs fails, go to an
authorised workshop for replacement.
Side turn signals
Fig. 116 in the
Fig. 117 Turn signal integrated in the rear
view mirror
The side turn signals are LEDS and are inte-
grated in the exterior mirrors.
In case of failure, go to an authorised work-
shop to have them replaced.
Fuses and bulbs
111