Seat Ateca Owner's Manual page 153

The light distribution of the halogen and full-
LED headlights allows the specific "tourist
light" values to be met without the need for
stickers or changes in the settings.
Note
"Tourist light" is only allowed temporarily. If
you are planning a long stay in a country that
drives on the other side, you should take the
vehicle to an Authorised Technical Service to
change the headlights.
Headlight range control
Fig. 145 Next to the steering wheel: Head-
light range control
›››
The headlight range control Fig. 145
modified according to the value of the head-
light beam and the vehicle load status. This
offers the driver optimum visibility and the
headlights do not dazzle oncoming drivers
›››
.
Lights and visibility
The headlights can only be adjusted when
the dipped beam is switched on.
›››
To reset, turn switch
Value Vehicle load status
Two front occupants, luggage compart-

ment empty
All seats occupied, luggage compartment

empty
All seats occupied, luggage compartment

full. With trailer and minimum drawbar
load.
Driver only, luggage compartment full With

trailer and maximum drawbar load.
a)
If the vehicle load does not correspond to those shown in the
table, it is possible to select intermediary positions.
OR:
Using the Easy Connect system, by means of
the button and the function button SET-

TINGS > Lights > Headlight height
›››

adjustment
Two front occupants, luggage compart-
Setting 0
ment empty
All seats occupied, luggage compart-
is
Setting 1
ment empty
All seats occupied, luggage compart-
Setting 2 ment full. With trailer and minimum
drawbar load.
Setting 3
Fig. 145:
Dynamic headlight range control
a)
The control is not mounted in vehicles with
dynamic headlight range control. The head-
light range is automatically adjusted accord-
ing to the vehicle load status when they are
switched on.
Heavy objects in the vehicle may mean that
the headlights dazzle and distract other driv-
ers. This could result in a serious accident.
●
status so that it does not blind other drivers.
Lighting of the instrument panel,
screens and controls
Depending on the model, the lighting of the
page 33).
instrument panel and controls can be adjus-
ted in the Easy Connect system, using the
button and the SETTINGS function button
›››

With the ignition on and without light activa-
tion, the instrument panel lighting remains
activated in daytime light conditions. The
lighting is reduced as the exterior light di-
minishes. In some cases, e.g. when driving
Driver only, luggage compartment full
Driving with trailer and minimum draw-
bar load.
WARNING
Adjust the light beam to the vehicle load
page 33.

»
151