Driver Information System - Seat Ateca Owner's Manual

Driver information System

Introduction
With the ignition switched on, it is possible
to read the different functions of the display
by scrolling through the menus.
In vehicles with multifunction steering wheel,
the multifunction display can only be operat-
ed with the steering wheel buttons.
The number of menus displayed on the in-
strument panel will vary according to the ve-
hicle electronics and equipment.
A specialised workshop will be able to pro-
gramme or modify additional functions, ac-
cording to the vehicle equipment. SEAT rec-
ommends visiting a SEAT Official Service.
Some menu options can only be read when
the vehicle is at a standstill.
As long as a priority 1 warning is displayed, it
will not be possible to read the menus
›››
page 40. Some warning messages can
be confirmed and made to disappear with the
windscreen wiper lever button or the multi-
function steering wheel button.
The information system also provides the fol-
lowing information and displays (depending
on the vehicle's equipment):
›››
Driving data page 38
MFD from departure
■
36
The essentials
■ MFD from refuelling
MFD total calculation
■
›››
Assist systems page 39
›››
Navigation Booklet Navigation system
››› ›››
Audio Booklet Radio or Booklet Naviga-
tion system
››› ›››
Telephone Booklet Radio or
Navigation system
›››
Vehicle status page 33
WARNING
Any distraction may lead to an accident, with
the risk of injury.
● Do not operate the instrument panel con-
trols when driving.
Using the menus on the instrument
panel
Booklet
Fig. 43 Windscreen wiper lever: control but-
tons.
Right side of multifunction steering
Fig. 44
wheel: control buttons.
The driver information system is controlled
with the multifunction steering wheel buttons
›››
Fig. 44 or with the windscreen wiper lever
›››
Fig. 43 (if the vehicle is not equipped with
multifunction steering wheel).