Seat Ateca Owner's Manual page 269

There are four different views to choose from:
Key to the Fig. 230:
Symbol Meaning
Front camera area
A
Right camera area
B
Rear camera area
C
Left camera area
D

Exit the current display.

Three-dimensional views
Depending on the equipment: connect-

ing and disconnecting the ParkPilot
sound.
Setting the display: brightness, contrast

and colour.
The aerial view is generated by combining
the images from all the cameras 
›››
Fig. 230. The aerial view can be selected
by pressing the vehicle in the area.
Select the corresponding view by pressing
›››
Fig. 230
the different areas
aerial view or the reduced aerial view.
Conditions necessary for the use of the Area
View system
The doors and the rear lid must be closed.
●
Driver assistance systems
● The image must be reliable and clear. For
this reason, for example, the camera lens
must be clean.
● The area around the vehicle must be clearly
and totally visible.
● The area for parking or manoeuvring
should be a flat surface.
The vehicle should not be loaded very
●
heavily at the rear.
● The driver must be used to the system.
● There should be no damage to the vehicle
in the camera area. If the position or installa-
tion angle of the cameras have been
changed, e.g. after a rear-end collision, the
system should be checked by a specialised
workshop.
Camera image view
● Aerial view (bird's eye view): to obtain a
panoramic view of the vehicle , three-di-
mensional views, from different camera posi-
tions.
● Front Camera (front view): to observe traffic
ahead of the vehicle (vehicles crossing) ,
for front parallel parking , when approach-
ing an obstacle and in off-road driving .
to of the
A D
● Side cameras (side view): to view the area
close to the sides of the vehicle, both on the
left  and on the right , or a combination of
both sides .
● Rear camera (rear view): To observe traffic
behind the vehicle (vehicles crossing) , for
reverse perpendicular parking , for reverse
parallel parking  and for hitching a trailer
to the vehicle .
The selected view is displayed on the right
side of the screen. The reduced aerial view
shown on the right side displays the view
framed in yellow. In addition, the right mar-
gin of the screen displays the menu options
possible and the views (the so-called
"modes") of the camera in question. The ac-
tive view (mode) at the time is highlighted.
The reduced aerial view can be hidden by
pressing the  symbol to thus display the se-
lected view full-screen.
267