Seat Ateca Owner's Manual page 112

Rear lights (in the rear lid)
Fig. 113 Rear lid open: remove the lid.
Fig. 114 Remove the bulb holder.
The rear lid must be open to change the
bulbs.
Follow the steps indicated:
1. Remove the rear lid cover in the direc-
›››
tion indicated Fig.
110
2. Unlock the securing tabs from the bulb
holder
holder to the left
3. Remove the bulb holder from its loca-
tion.
4. Lightly press the defective bulb into the
bulb holder, then turn it to the left and
remove it.
5. Fit the new bulb, pressing it into the
bulb holder and turn it to the right as far
as it will go.
6. Use a cloth to remove any fingerprints
from the glass part of the bulb.
7. Check that the new bulb works properly.
8. Carry out the same actions in reverse or-
der for assembly and pay special atten-
tion to placing the bulb holder, ensuring
that the tabs are properly secured.
Note
For LED pilots, you can only change the re-
verse bulb.
113.
Emergencies
›››
Fig. 114 or turn the bulb
1
and .
2 3
Changing number plate light bulbs
Fig. 115 In the rear bumper: number plate
light.
Number plate light: Remove the bulb
Fig. 116
holder.
Follow the steps indicated:
1. Press the number plate light in the direc-
›››
tion of the arrow Fig. 115.
2. Remove the number plate light.