Seat Ateca Owner's Manual page 41

Data summary
Menu Function
The current fuel consumption dis-
play operates throughout the jour-
Current fuel
ney, in litres/100 km; and with the
consumption
engine running and the vehicle
stopped, in litres/hour.
After turning on the ignition, aver-
age fuel consumption in li-
tres/100 km will be displayed after
travelling about 100 metres. Other-
Average fuel
wise horizontal lines are displayed.
consumption
The value shown is updated approxi-
mately every 5 seconds.
®
ACT *: Depending on the equip-
ment, number of active cylinders.
Approximate distance in km that can
still be travelled with the fuel re-
Operating maining in the tank, assuming the
same style of driving is maintained.
range
This is calculated using the current
fuel consumption.
This indicates the hours (h) and mi-
Travelling
nutes (min) since the ignition was
time
switched on.
Distance covered in km (m) after
Journey
switching on the ignition.
The average speed will be shown af-
ter a distance of about 100 metres
Average has been travelled. Otherwise hori-
speed zontal lines are displayed. The value
shown is updated approximately ev-
ery 5 seconds.
The essentials
Menu Function
Digital dis-
Current speed displayed in digital
play of
format.
speed
Speed warn- If the stored speed is exceeded (be-
ing at --- tween 30 - 250 km/h, or 19 -
km/h or Speed 155 mph), an audible warning is
given together with a visual warn-
warning at
ing.
--- mph
Detection of
The traffic signs detected are dis-
traffic
played.
signs
Oil tempera- Updated engine oil temperature dig-
ital display
ture
Coolant tem-
Digital display of the current temper-
perature
ature of the liquid coolant.
gauge
Information about the vehicle's
main convenience consumers. It is
Convenience
displayed by means of a consump-
consumers
tion indicator bar.
Tips on how to save fuel.
Eco tips
Reset data
Reset journey data when setting off.
"when set-
ting off"
Reset data
Reset travel journey to zero.
for "total
calculation"
Storing a speed with the speed warning
Select the display Speed warning at
●
--- km/h (--- mph)
Press the button on the windscreen
●

wiper lever or the button on the multifunc-

tion steering wheel to store the current speed
and activate the warning.
● To switch system on: adjust to the desired
speed within 5 seconds using the rocker
switch on the windscreen wiper lever or

by turning the thumbwheel on the multifunc-
tion steering wheel. Next, press the button
or again or wait several seconds.
 
The speed is stored and the warning activa-
ted.
● To switch system off: press the but-
ton or . The stored speed is de-
 
leted.
Assist systems menu
Menu Function
Adaptive cruise control (ACC) dis-
ACC
›››
play page 221.
Switching the monitoring system on
Front Assist
›››
and off page 217.
Switching the Lane Assist system on
Lane Assist *
›››
page 231.
or off
Switching the Blind Spot Detection
*
Blind spot
system (BSD) on or off
»
›››
page 237
39