Seat Ateca Owner's Manual page 40

Menu Function
Station display on the radio.
Track name on the CD.
Audio
Track name in Media mode
›››
dio or Booklet Navigation
Information and possible configurations
Tele- of the mobile phone preinstallation
›››
Booklet Radio
phone
system.
Display of the current warning or informa-
tion texts and other system components,
Vehicle
depending on the equipment
status
›››
page 120.
Driving data
The MFD (multifunction display) shows differ-
ent values for the journey and the consump-
tion.
Changing between display modes on the
MFD
● In vehicles without multifunction steering
wheel: Press the rocker switch
›››
windscreen wiper lever
● Vehicles with a multifunction steering
wheel: turn the thumbwheel
Multifunction display memory
The multifunction display is equipped with
three memories that work automatically: MFD
38
from departure, MFD from refuelling and MFD
total calculation. On the screen display, you
can read which memory is currently dis-
played.
›››
Booklet Ra-
system.
● Toggle between memories with the ignition
on and the memory displayed: Press the

›››
or Booklet Navigation
or the
wheel.
Menu
MFD from
departure
MFD from
refuelling
on the

Fig. 43.
›››
Fig. 44.
The essentials
button on the windscreen wiper lever
button of the multifunction steering

Function
Display and storage of the values for
the journey and the consumption from
when the ignition is switched on to
when it is switched off.
If the journey is continued in less than
2 hours after the ignition is switched
off, the new data is added to the data
already stored in the memory. The
memory will automatically be deleted if
the journey is interrupted for more than
2 hours.
Display and storage of the values for
the journey and the consumption. By
refuelling, the memory will be erased
automatically.
Menu Function
The memory records the values for a
specific number of partial trips, up to a
total of 19 hours and 59 minutes or 99
hours and 59 minutes, or 1999.9 km or
MFD total
9999 km, depending on the model of
calcula-
tion instrument panel. On reaching either of
a)
these limits , the memory is automati-
cally erased and starts to count from 0
again.
a) It varies according to the instrument panel version.
Erasing a memory manually
Select the memory that you wish to erase.
●
● Hold the button of the multifunction

steering wheel or the button of the multi-

function wheel pressed down for about 2 sec-
onds.
Personalising the displays
In the Easy Connect system you can adjust
which of the possible displays of the MFD can
be shown on the instrument panel display
with the button and the
SETTINGS

›››

button page 120.
function