Seat Ateca Owner's Manual page 175

Function button: Function
It enables activation and deactivation of

the PureAir and opens the submenu.
Air conditioning user instructions
The interior cooling system only works when
the engine is running and fan is switched on.
The air conditioner operates most effectively
with the windows and the panoramic sliding
sunroof closed. However, if the vehicle has
heated up after standing in the sun for some
time, the air inside can be cooled more quick-
ly by opening the windows and the panoram-
ic sliding sunroof briefly.
Climatronic: change the temperature unit on
the screen of the radio or on the factory-fit-
ted navigation system
Changing the temperature display from Cel-
sius to Fahrenheit on radio or on the factory-
Air conditioning
fitted navigation system is done using the
menu on the instrument panel
›››

page 36.
The cooling system cannot be activated
If the air conditioning system cannot be
switched on, this may be caused by the fol-
lowing:
The engine is not running.
●
● The fan is switched off.
The air conditioner fuse has blown.
●
● The outside temperature is lower than ap-
proximately +3°C (+38°F).
● The air conditioner compressor has been
temporarily switched off because the engine
coolant temperature is too high.
Another fault in the vehicle. Have the air
●
conditioner checked by a specialised work-
shop.
Special Characteristics
If the humidity and temperature outside the
vehicle are high, condensation can drip off
the evaporator in the cooling system and
form a pool underneath the vehicle. This is
normal and does not indicate a leak!
Note
After starting the engine, any residual humid-
ity in the air conditioner could mist over the
windscreen. Switch on the defrost function as
soon as possible to clear the windscreen of
condensation.
173