Seat Ateca Owner's Manual page 39

Enabling the main menu
Switch the ignition on.
●
● If a message or vehicle pictogram appears,
›››
press button Fig. 43 on the windscreen
1
wiper lever or button on the multifunction

›››
Fig. 44.
steering wheel
● If managed from the windscreen wiper lev-
er: to display the main screen or to return to
the main menu from another menu, hold
›››
down the rocker button Fig. 43
If managed from the multifunction steering
●
wheel: the main menu list is not displayed.
To go from point to point in the main menu,
press button or several times
   
›››
Fig. 44.
Select a submenu
›››
Press the rocker switch Fig. 43
●
windscreen wiper lever up or down or turn
the thumbwheel of the multifunction steering
›››
wheel Fig. 44 until the desired option ap-
pears marked on the menu.
● The selected option is displayed between
two horizontal lines. In addition, a triangle is
displayed on the right: 
● To consult the submenu option, press but-
›››
ton Fig. 43 on the windscreen wiper
1
lever or button on the multifunction steer-

›››
ing wheel Fig. 44.
The essentials
Making changes according to the menu
With the rocker switch on the windscreen
●
wiper lever or the thumbwheel of the multi-
function steering wheel, make the desired
changes. To increase or decrease the values
more quickly, turn the thumbwheel faster.
● Mark or confirm the selection with button
›››
Fig. 43
on the windscreen wiper lever
1
or button on the multifunction steering

›››
wheel Fig. 44.
.
2
Button for the driver assistance sys-
tems*
on the
2
Fig. 45 On the turn signal and main beam
headlight lever: button for the driver assis-
tance systems
With the turn signal and main beam head-
light lever button, you can activate or deacti-
vate the driver assistance systems displayed
in the Assist systems menu
›››

page 208.
Activate or deactivate a driver assistance
system
›››
● Briefly press the button Fig. 45
rection of the arrow to open the menu As-
sist systems .
Select the driver assistance system and ac-
●
›››
tivate or deactivate it page 36. A mark indi-
cates that driver assistance system is switch-
ed on.
Selection menu
Menu Function
Information and possible configurations
Driving
of the multifunction display (MFD)
data
›››
page 38.
Information and possible configurations
Assist
of the driver assistance systems
systems
››› ›››
page 39, page 33.
Information instructions from the activa-
ted navigation system: when a route guid-
ance is activated, the turning arrows and
proximity bars are displayed. The appear-
Naviga- ance is similar to the Easy Connect sys-
tion tem.
If route guidance is not activated, the di-
rection of travel (compass) and the name
of the street along which you are driving
›››
Booklet Navigation
are shown
in the di-
»
system.
37