Seat Ateca Owner's Manual page 52

Removing the cover from the selector lever
Apply the handbrake 
●
the car does not move.
Carefully pull the corners of the selector
●
lever boot and twist it upwards above the lev-
er handle.
Releasing the selector lever
Using a screwdriver, press and hold the yel-
●
low unlocking tab sideways
50
● Press the interlock button on the selector
lever and move the selector lever to posi-
›››
to ensure that
tion N.
● After carrying out the manual release, at-
tach the selector lever boot on the gearbox
console again.
If the power supply should ever fail (e.g. dis-
charged battery) and the vehicle has to be
pushed or towed, the selector lever must first
›››
Fig. 56.
The essentials
be moved to position N, after operating the
manual release mechanism.
WARNING
The selector lever may be moved out of posi-
tion P only when the handbrake is firmly ap-
plied. If this does not work, secure the vehi-
cle with the brake pedal. On a slope the vehi-
cle could otherwise start to move inadver-
tently after shifting the selector lever out of
position P - accident risk!