Seat Ateca Owner's Manual page 245

Engine
Depending on the profile selected, the en-
gine responds more spontaneously or more
in harmony with the movements of the accel-
erator. Additionally, when the Eco profile is
selected, the Start-Stop function is automati-
cally activated.
In vehicles with automatic transmission, the
gear change points are modified to position
them in lower or higher engine speed ranges.
Additionally, the Eco profile activates the in-
ertia function, enabling consumption to be
further reduced.
In manual gearbox vehicles, the Eco profile
causes the gear change recommendation in-
dications that appear on the dash panel to
vary, facilitating more efficient driving.
Address
The power steering varies its driving modes
and adapts to the profile selected, thus offer-
ing the best behaviour for each situation.
Air conditioning
In vehicles with Climatronic, this can operate
in Eco mode, especially restricting fuel con-
sumption.
1) Only for 4Drive models.
Driver assistance systems
Adaptive cruise control (ACC)
The acceleration gradient of the adaptive
cruise control varies according to the active
›››
page 221.
driving profile
Electronic stability control (ESC)
In the Offroad and Snow driving profiles,
the electronic stability Control (ESC)
›››
page 189 adjusts to adapt to the terrain.
In addition, hill descent control (HDC) is acti-
›››
vated in the Offroad profile
Adjusting driving profile
Centre console: Driving Experience
Fig. 213
button.
You can select the Eco , Normal , Sport , In-
, Offroad
dividual
the following way:
Turn the Driving Experience button until the
●
required profile lights up on the Easy Con-
nect system display as well as on the Driving
Experience button
OR: select the required profile on the
●
touch-screen of the Easy Connect system, in
the menu that opens up on turning the
Driving Experience button.
page 210.
The features of each profile can be seen by
pressing the Profile information button of the
Easy Connect system display.
In the Individual profile it is possible to
configure the characteristics of the vehicle
using the Profile setup button of the Easy
Connect system display.
An icon on the Easy Connect system display
provides information about the active profile
if it is different than Normal . The selector
identifies the profile chosen by means of a
red LED light.
1) and Snow 1) profiles in
›››
Fig. 213.
»
243