Seat Ateca Owner's Manual page 254

Selecting a parking mode
On the instrument panel display:
Fig. 219
displaying the Park Assist system with re-
duced display.
Selecting a parking mode with Park Assist
with prior step in front of the space
After activating the Park Assist system and
after detecting a parking space, the display
on the instrument panel proposes a parking
mode. The Park Assist system selects the
parking mode automatically. The selected
252
Operation
mode is shown on the instrument panel dis-
›››
Fig. 219. The reduced display of other
play
possible parking modes is also shown
›››
Fig. 218. If the mode selected by the sys-
tem does not correspond to the desired
mode, you can select another mode by press-
›››
ing the  button Fig. 217.
Action
The necessary conditions to park with Park Assist
1.
›››
page 254.
have to be met
Press the  button.
A control lamp on the  button lights up when
the system is switched on. Additionally, the se-
2.
lected parking mode is shown on the instrument
panel display and the reduced display shows an-
other parking mode it can be changed to.
Overview of reduced displays for park-
Fig. 218
ing modes:  Parallel parking in reverse.  Per-
pendicular parking in reverse.  Perpendicular
parking forwards.
Action
Turn on the corresponding turn signal towards
the side of the road where you are parking. The
instrument panel displays the side correspond-
3.
ing to the road. By default, if the turn signal is
not on, it parks on the right in the direction of
traffic.
If necessary, press the  button again to change
to the next parking mode.
4.
Once you have switched to all possible parking
modes, if the  button is pressed again, the
system switches off.
Press the  button again to switch the system
5.
back on.
Follow the instructions displayed on the instru-
6. ment panel while paying attention to traffic and
drive the vehicle past the parking space.