Seat Ateca Owner's Manual page 47

Operation of the turn signal lever
Switching on the CCS: Move switch
●
›››
Fig. 49 to . The system is on. If no
1
speed has been programmed, the system will
not control it.
● Activating the CCS: Press button
in the  area. The current speed is
2
memorised and controlled.
● Temporarily switching off the CCS: Move
›››
switch Fig. 49 to  or push the
1
brake. The cruise control system is switched
off temporarily.
Reactivating the CCS: Press button
●
›››
Fig. 49 in . The memorised speed
2
is saved and controlled again.
● Increasing stored speed during CCS regula-
tion: press button in . The vehicle ac-
2
celerates until the new stored speed.
The essentials
● Reducing stored speed during CCS regula-
tion: press button
speed by 1 km/h (1 mph). Speed is reduced
until reaching the new stored speed.
● Switching off the CCS: Move switch
›››
Fig. 49
to . The system is disconnec-
1
›››
Fig. 49
ted and the memorised speed is deleted.
Operation using the third lever
● Switching on the CCS: move the third lever
›››
Fig. 50. The system switches on but it
to 
does not control the speed as no speed has
been programmed.
● Activating the CCS: press the 
button. It memorises and maintains the cur-
rent speed.
● Temporarily switching off the CCS: move
the lever to 
in  to lower the
2
›››
Fig. 50
›››
Fig. 50 and release it or
press the brake pedal. The cruise control sys-
tem is switched off temporarily.
● Reactivating the CCS: move the lever to
›››
Fig. 50
and release it. The memo-

rised speed is saved and controlled again.
● Switching off the CCS: move the third lever
›››
to position  Fig. 50. The system is dis-
connected and the memorised speed is de-
leted.

›››
in Operation on page 213

›››
page 212
45