Seat Ateca Owner's Manual page 109

Change the front bulbs
Dipped beam headlight
In the engine compartment: remove
Fig. 105
the lid.
Fig. 106 In the engine compartment: dipped
beam headlight.
Follow the steps indicated:
1. Raise the bonnet.
Fuses and bulbs
›››
2. Move the loops Fig. 105
rection of the arrow and remove the cov-
er.
›››
Fig. 106
3. Remove connector
the bulb.
›››
4. Unclip the retainer spring
pressing clockwise and inwards.
5. Extract the bulb and fit the replacement
so that the lug on the base fits into the
recess on the reflector.
6. Installation involves all of the above
steps in reverse sequence.
Main beam headlight bulb and turn
signal bulb
Fig. 107 In the engine compartment: remove
the lid.
in the di-
1
from
2
Fig. 106
3
Fig. 108 In the engine compartment: main
beam headlight bulb
.
3
Follow the steps indicated:
Main beam headlight bulb
1. Raise the bonnet.
2. Move the loop
rection of the arrow and remove the cov-
er.
3. Slide connector
or right and pull.
4. Remove the bulb by disconnecting the
connector.
5. Installation involves all of the above
steps in reverse sequence.
and turn signal bulb
2
›››
Fig. 107
in the di-
1
›››
Fig. 108 to the left
2
»
107