Parameters" Menu - socomec MASTERYS IP Plus Installation And Operating Manual

8
MENU

8.4 "PARAMETERS" MENU

Displays only the confi guration parameters set for the UPS.
The messages in this menu are identifi ed by an asterisk in the confi gurations service menu.
The parameters can only be changed by entering the service / confi gurations menu.
CURRENT DATA menu
Message
MASTERYS 3/3 30 KVA
UC FW. REVISION
RV 000 CKS: 0000
DSP FW. REVISION
RV 000 CKS: 0000
8.5 "SERVICE" MENU.
This is used to change the confi guration parameters, insert the warranty activation code and display the service
code.
8.5.1 "Activation code" menu.
During activation of the equipment a warranty activation code, made up of four characters, is requested to com-
plete the start-up procedure.
The activation code is provided directly by the reference Support Centre upon communication of the serial number
of the equipment which is displayed in the next message by pressing ENTER.
When contact is made with the Support Centre for the activation code, detailed information can be obtained on the
UPS functions available and on the periodic preventive maintenance programmes.
36
IOMMASIPXX09-GB 04
Description
Displays the size, input and output phases confi guration and the serial number of UPS.
IIdentifi es the software release of microprocessor
Identifi es the software release of DSP.
MANUFACTURER WARRANTY
VALIDATION
PLEASE INSERT THE CODE
SEE INSTALLATION MANUAL
FOR PROCEDURE
SN: 0000000000
MASTERYS IP+
10-40 kVA