Table of Contents
Advertisement
Column
Secpolicy
The name of the security policy assigned to the SSL server
CA Group
The name of the certificate chain, if one has been assigned to the server
You are asked whether to save the configuration to flash memory.
Would you like to save your configuration to flash? (y/n):
If you type y, you will be asked to wait while the configuration is saved to flash, and the
QuickStart wizard finishes. If you type n, the QuickStart wizard finishes.
Caution: If the configuration is not saved to flash memory, the configuration will be
lost during a power cycle or if the
Using the QuickStart Wizard with a Configured Appliance
If you wish to run the QuickStart wizard for a previously configured SonicWALL SSL
appliance, follow these steps:
1
Initiate a management session and start the configuration manager as described
previously.
2
Use the appropriate method to attach to the device (remote management only),
depending upon the number of devices in the list returned by the show device list
command.
3
Enter Privileged mode.
4
Enter the command quick-start. If more than one device is in Privileged mode,
enter on devname quick-start, where devname is the name of the device (remote
only).
5
Go on to "Following the QuickStart Wizard".
Description
command is used.
reload
Chapter 4 QuickStart Wizard
Page 45
Advertisement
Table of Contents
