Table of Contents
Advertisement
E
ELECTROMAGNETIC COMPATIBILITY
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A
Note:
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
To maintain compliance with the limits of a Class A digital device, SonicWALL requires that
you use quality interface cables when connecting to this device. During testing for
certification, SonicWALL used Category 5 cables.
Caution: Modifying this equipment or using this equipment for purposes not
shown in this manual without SonicWALL Corporation's written consent could
void the user's authority to operate this equipment.
The user may find the following booklet prepared by the Federal Communications
Commission helpful: The Interference Handbook. This booklet is available from the U.S.
Government Printing Office, Washington, D.C. 20402. Stock No. 004-000-00345-4.
For more information regarding the above statement, please contact SonicWALL, Inc. at
1160 Bordeaux Drive; Sunnyvale, CA 94089-1209; telephone 408-745-9600.
CISPR 22 (EN 55022) Class A
Warning: This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
Appendix E Electromagnetic Compatibility
Page 123
Advertisement
Table of Contents
