Table of Contents
Advertisement
Command:
configure
on <devname|groupname|all> configure
Remote, Serial, Telnet
Availability:
Description:
Enters Configuration mode for a single device. When using remote configuration,
use the
devname is the name of a single device, groupname is the name of a user-defined
device group, and
Command Set" for more information.
Command:
copy running-configuration [<filename>]
on <devname|groupname|all> copy running-configuration [<filename>]
Remote
Availability:
Writes the running-configuration of the current device to a file, where filename is
Description:
the path and name of the file. If you do not specify a file name, you are prompted
for it. When using remote configuration, use the
specify the target(s) of the command, where devname is the name of a single
device, groupname is the name of a user-defined device group, and
all appropriate devices.
Command:
copy running-configuration <url>
Serial, Telnet
Availability:
Writes the running-configuration of the current device to a file, where url is the URL
Description:
of the file.
Command:
copy running-configuration startup-configuration
Availability:
Serial, Telnet
Description:
Writes the running-configuration of the current device to its startup-configuration.
Command:
copy startup-configuration <url>
Availability:
Serial, Telnet
Description:
Writes the startup-configuration of the device to a remote host, where url is the
URL of the file.
Command:
copy startup-configuration running-configuration
Availability:
Serial, Telnet
Description:
Merges the startup configuration of the device to its running configuration.
Command:
copy to flash [<filename>]
on <devname|groupname|all> copy to flash [<filename>]
Availability:
Remote
Description:
Uploads a SonicWALL image file to the device flash, where filename is the path and
name of the file. You are prompted for the file name if you do not provide it on the
command line. When using remote configuration, use the
to specify the target(s) of the command, where devname is the name of a single
form of the command to specify the target(s) of the command, where
on
represents all appropriate devices. See "Configuration
all
Appendix C Command Summary
form of the command to
on
represents
all
form of the command
on
Page 95
Advertisement
Table of Contents
