Table of Contents
Advertisement
Command:
show terminal
Remote, Serial, Telnet
Availability:
Description:
Displays terminal setting information.
Command:
show version
Remote, Serial, Telnet
Availability:
Description:
Displays configuration manager version information.
Command:
[no] terminal history <length>
Remote, Serial, Telnet
Availability:
Sets the number of commands saved in the history buffer, where length is the
Description:
number of commands. The default is 25. Use the
list. The
view the history size using the
Command:
terminal length
Remote, Serial, Telnet
Availability:
Description:
Sets the number of lines in a terminal window.
Command:
[no] terminal pager
Remote, Serial, Telnet
Availability:
Description:
Enables the terminal pager. Using the
Command:
terminal reset
Availability:
Remote, Serial, Telnet
Description:
Resets the internal state of the terminal.
Command:
terminal width
Availability:
Remote, Serial, Telnet
Description:
Sets the width of the terminal window.
Command:
traceroute <ipaddr | name>
Availability:
Remote, Serial, Telnet
Description:
Displays the router hops to the specified destination, where ipaddr is the IP
address of the destination and name is the host name (serial/telnet only).
command displays the last commands executed. You may
show history
show terminal
Appendix C Command Summary
keyword to disable the history
no
command.
keyword disables the pager.
no
Page 93
Advertisement
Table of Contents
