SonicWALL SSL-R User Manual page 55

for SSL connections and port 81 for sending clear text. Assign the key association
and security policies just created. Return to Privileged mode.
(config-ssl[myDevice])> server myServer create
(config-ssl-server[myServer])> ip address 10.1.2.4
(config-ssl-server[myServer])> sslport 443
(config-ssl-server[myServer])> remoteport 81
(config-ssl-server[myServer])> key myKey
(config-ssl-server[myServer])> cert myCert
(config-ssl-server[myServer])> secpolicy myPol
(config-ssl-server[myServer])> end
(config-ssl[myDevice])> end
(config[myDevice])> end
inxcfg>
Secure server names can consist of Arabic numerals and upper- and lowercase
Note:
alphabetic, underscore (_), hyphen (-), and period (.) characters. Secure
server names must begin with an alphabetic character.
6 Save the configuration to flash memory. If it is not saved, the configuration is lost
during a power cycle or if the reload command is used.
inxcfg> write flash
inxcfg>
You can review the configuration of the currently edited SSL object (key,
Note:
certificate, certificate chain, security policy, or server) by using the
command in the appropriate mode.
EXAMPLE: Configuring Encrypted Management Sessions
While the serial management sessions are secure due to their nature, they are not always
convenient. You can set a passphrase and encryption method for remote configuration
sessions to secure them.
1 Initiate a serial management session, and enter Privileged and Configuration
modes.
myDevice> enable
myDevice# config
2 Set the remote management encryption method, selecting DES, and passphrase
(shared secret).
(config[myDevice])# remote-management encryption DES
(config[myDevice])# remote-management shared-secret
Enter shared secret:
Verify shared secret:
(config[myDevice])#
Chapter 5 Configuration Manager
info
Page 55