Certificate Group Configuration Command Set
Use Certificate Group Configuration commands to set up and manage certificate groups
utilized for chaining. Enter Certificate Group Configuration mode by using the configure
command in Privileged mode, the ssl command in Configuration mode, and the certgroup
command in SSL Configuration mode.
Command:
[no] cert <certObject>
Remote, Serial, Telnet
Availability:
Description:
Adds the specified, existing certificate object into the current certificate group,
where certObject is the name of the certificate group. You may have up to 64
certificate objects per certificate group. The
from the current certificate group.
Command:
end
Remote, Serial, Telnet
Availability:
Description:
Exits Certificate Group Configuration mode, activates all changes, and returns to
SSL Configuration mode.
Command:
exit
Remote, Serial, Telnet
Availability:
Description:
Exits Certificate Group Configuration mode, activates all changes, and returns to
SSL Configuration mode.
Command:
help [command]
Availability:
Remote, Serial, Telnet
Description:
Displays help information for the specified command, where command is the name
of the command. If you do not specify a command, help information is displayed
for all Certificate Group Configuration commands.
Command:
info
Availability:
Remote, Serial, Telnet
Description:
Displays current information about the certificate group being created or edited.
Appendix C Command Summary
flag is used to remove a certificate
no
Page 113