Table of Contents
Advertisement
Command:
Availability:
Description:
Command:
Availability:
Description:
Page 92 SSL-IA/SSL-R User's Guide
of a single device, groupname is the name of a user-defined device group, and
represents all appropriate devices. The statistics displayed are:
Error
AC
Active Client Connections, Active Server Connections
AS
Active Sockets
SNE
SSL Negotiation Errors
TSE
Total Socket Errors
CES
Connection Errors to Remote Server
TCBE
Total Connection Block Errors
TSCR
Total SSL Connections Refused, Total SSL Connections Rejected
TCA
Total Connections Accepted
TROH
Total RSA Operations in Hardware
TSNS
Total SSL Negotiations Succeeded
Values for Active Server Connections and Total SSL Connections
Note:
Refused are not shown when using the
show syslog
on <devname|groupname|all> show syslog
Remote, Serial, Telnet
Displays the list of hosts to which diagnostic messages from the device are sent.
When using remote configuration, use the
target(s) of the command, where devname is the name of a single device,
groupname is the name of a user-defined device group, and
appropriate devices.
show system-resources [continuous] [interval <value>]
on <devname|groupname|all> show system-resources [continuous]
[interval <value>]
Remote, Serial, Telnet
(This command must be given on one line.) Displays system memory and CPU
usage for a single device. Use the
every second. Use the
where value is the interval in seconds. Press any key to stop displaying information.
When using remote configuration, use the
target(s) of the command, where devname is the name of a single device,
groupname is the name of a user-defined device group, and
appropriate devices.
Description
on
continuous
option to specify an interval for display updates,
interval
on
option.
continuous
form of the command to specify the
represents all
all
option to update the information
form of the command to specify the
represents all
all
all
Advertisement
Table of Contents
