Table of Contents
Advertisement
SVRR
SVRRBC
Command:
show ssl key [<keyname>]
on <devname|groupname|all> show ssl key [<keyname>]
Remote, Serial, Telnet
Availability:
Description:
Displays summary data for the specified public/private key pair loaded on a single
device, where keyname is the name of the key. If you do not specify a key name,
all key information is displayed. When using remote configuration, use the
of the command to specify the target(s) of the command, where devname is the
name of a single device, groupname is the name of a user-defined device group,
and
all
Command:
show ssl secpolicy [<polname>]
on <devname|groupname|all> show ssl secpolicy [<polname>]
Remote, Serial, Telnet
Availability:
Description:
Displays summary data for the specified security policy on a single device, where
polname is the name of the security policy. If you do not specify a security policy
name, all security policy information is displayed. When using remote
configuration, use the
command, where devname is the name of a single device, groupname is the name
of a user-defined device group, and
Command:
show ssl server [<servname>]
on <devname|groupname|all> show ssl server [<servname>]
Availability:
Remote, Serial, Telnet
Description:
Displays information for the specified configured logical secure server on a single
device, where servname is the name of the server. When using remote
configuration, use the
command, where devname is the name of a single device, groupname is the name
of a user-defined device group, and
Command:
show ssl statistics [continuous] [interval <value>]
on <devname|groupname|all> show ssl statistics [continuous]
[interval <value>]
Availability:
Remote, Serial, Telnet
Description:
(This command must be given on one line.) Displays SSL statistics summed over
all secure logical servers on a single device. Use the
the statistics every second. Use the
display updates, where value is the interval in seconds. Press any key to stop
displaying information. When using remote configuration, use the
command to specify the target(s) of the command, where devname is the name
Error
System Read Errors from Remote Server
Broken Connection Read Errors from Remote Server
represents all appropriate devices.
form of the command to specify the target(s) of the
on
form of the command to specify the target(s) of the
on
Appendix C Command Summary
Description
represents all appropriate devices.
all
represents all appropriate devices.
all
continuous
option to specify an interval for
interval
form
on
option to update
form of the
on
Page 91
Advertisement
Table of Contents
