SonicWALL SSL-R User Manual page 41

After the certificate has been properly loaded, you are shown a summary and asked to
specify a security policy.
SSL-server name
IP address
Secure Port
Clear Port
Key name
Cert name
You need to enter a security policy for ssl-server 'myServer'.
To simplify the encryption algorithms, you have 3 options:
strong - RSA key size of 1024, DES_SHA1, 3DES_SHA1, ARC4_MD5 and ARC4_SHA1
weak - RSA key size of 512, exp DES_SHA1, ARC2_MD5, ARC4_MD5 and ARC4_SHA1
default - RSA key size of 1024, ARC4_MD5, ARC4_SHA1 and exp ARC4_MD5,
ARC4_SHA1, MD5
ARC4 is compatible with RC4™ RSA Data Security; ARC2 is compatible with RC2™ RSA Data
Security.
Enter the security policy for ssl-server 'myServer' [default]:
At the prompt, enter the name of the security policy to use. The "strong" policy includes
the most secure algorithms. The "weak" policy algorithms are less secure and appropriate
for export use. The "default" policy algorithms are those most commonly used. See
chapter Chapter 3 SSL Introduction for more algorithm information. If you enter an
invalid security policy name, you receive an error message and are prompted to re-enter
the name.
After the name of the security policy is accepted, you are prompted to verify the logical
secure server configuration.
The following SSL-server will be created:
SSL-server name
IP address
Secure Port
Clear Port
Key name
Cert name
Security Policy name
Is the above information correct? (y/n) :
CONFIGURE SSL-SERVER 'myServer' SECURITY POLICY
: myServer
: 10.1.2.3
: 443
: 80
: default
: default
SSL-SERVER 'myServer' SUMMARY
: myServer
: 10.1.2.3
: 443
: 80
: default
: default
: strong
Chapter 4 QuickStart Wizard
Page 41