Table of Contents
Advertisement
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Page 86 SSL-IA/SSL-R User's Guide
show history
Remote, Serial, Telnet
Displays the last commands executed. The number of commands stored in the
history may be configured by using the
view the history size by using the
show interface [network | server]
on <devname|groupname|all> show interface [network | server]
Remote, Serial, Telnet
Displays information for the specified Ethernet interface, where devname is the
name of the SSL device. The information includes connection, duplex, speed, and
autonegotiation settings. You must specify a device name unless only one SSL
device is attached. If you do not specify
interfaces on the specified device is displayed. When using remote configuration,
use the
form of the command to specify the target(s) of the command, where
on
devname is the name of a single device, groupname is the name of a user-defined
device group, and
all
show interface errors [<network | server>] [continuous] [interval
<value>]
on <devname|groupname|all> show interface errors [<network | server>]
[continuous] [interval <value>]
Remote, Serial, Telnet
(This command must be entered on one line.) Displays a listing of interface errors
for a single device. If an interface is not specified, errors for both interfaces are
displayed. If
continuous
Use the
option to specify an interval for display updates, where value is
interval
the interval in seconds. Press any key to stop displaying errors. When using remote
configuration, use the
on
command, where devname is the name of a single device, groupname is the name
of a user-defined device group, and
show interface statistics [<network | server>] [continuous] [interval
<value>]
on <devname|groupname|all> show interface statistics [<network |
server>] [continuous] [interval <value>]
Remote, Serial, Telnet
(This command must be entered on one line.) Displays interface statistics for a
single device. If an interface is not specified, statistics for both interfaces is
displayed. If
continuous
option to specify an interval for display updates, where value is the
interval
interval in seconds. Press any key to stop displaying statistics. When using remote
configuration, use the
on
command, where devname is the name of a single device, groupname is the name
of a user-defined device group, and
terminal history
show terminal
network
represents all appropriate devices.
is specified, error statistics are updated every second.
form of the command to specify the target(s) of the
represents all appropriate devices.
all
is specified, statistics are updated every second. Use the
form of the command to specify the target(s) of the
represents all appropriate devices.
all
command. You may
command.
or
, information for all
server
Advertisement
Table of Contents
