Table of Contents
Advertisement
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Page 104 SSL-IA/SSL-R User's Guide
[no] rdate-server <ipaddr>
Remote, Serial, Telnet
Specifies an RDATE protocol server to be used for date and time information,
where ipaddr is the IP address of the server. Use the
assignement.
[no] remote-management access-list <listid>
Remote, Serial, Telnet
Assigns the specified IP access list to the remote management subsystem, where
listid is the access list identifier. Use the
assignment in the remote management subsystem. Create access lists using the
command.
access-list
[no] remote-management enable
Remote, Serial, Telnet
Enables remote management for the current device. Remote management is
enabled by default. Use the
device.
remote-management encryption <AES | DES | RC4>
Remote, Serial, Telnet
Sets the encryption method for remote management sessions. Use this command
after setting a passphrase with the command
. Encryption begins at the next attach.
secret
remote-management port <portid|default>
Remote, Serial, Telnet
Sets the TCP/UDP service port used for remote management to the current device,
where portid is the port number. This port is used at the next attach. Use the
argument to return the port to the default.
default
Note:
You must enter a
management.
[no] remote-management shared-secret [passphrase]
Serial
Sets the shared secret passphrase used for encryption, where passphrase is the
shared secret. You are prompted for this passphrase the next time an attach
attempt is made. Use the
flag to clear the IP access list
no
flag to disable remote management of the current
no
remote-management shared-
command to activate or deactivate remote
reload
form of the command to delete the passphrase.
no
flag to clear the server
no
Advertisement
Table of Contents
