Table of Contents
Advertisement
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Page 96 SSL-IA/SSL-R User's Guide
device, groupname is the name of a user-defined device group, and
all appropriate devices.
copy to flash <url>
Serial, Telnet
Uploads a SonicWALL image file to the device flash, where url is the URL of the file.
copy to running-configuration [<filename>]
on <devname|groupname|all> copy to running-configuration
[<filename>]
Remote
(This command must be entered on one line.) Uploads a saved configuration file
and merges it to the running-configuration of a device, where filename is the path
and name of the file. You are prompted for the filename if you do not include it on
the command line. When using remote configuration, use the
command to specify the target(s) of the command, where devname is the name
of a single device, groupname is the name of a user-defined device group, and
represents all appropriate devices.
copy to running-configuration <url>
Remote, Serial, Telnet
Uploads a saved configuration file and merges it to the running-configuration of a
device, where url is the URL of the file.
copy to startup-configuration <url>
Serial, Telnet
Uploads a saved configuration file to the startup configuration of a device, where
url is the location of the file. You are prompted for the filename if you do not
include it on the command line.
disable
on <devname|groupname|all> disable
Remote, Serial, Telnet
Exits Privileged mode for a device. When using remote configuration, use the
form of the command to specify the target(s) of the command, where devname is
the name of a single device, groupname is the name of a user-defined device
group, and
represents all appropriate devices.
all
erase running-configuration
on <devname|groupname|all> erase running-configuration
Remote, Serial, Telnet
Erases the running configuration on the device. You must specify a device unless
only one device is attached. When using remote configuration, use the
the command to specify the target(s) of the command, where devname is the
represents
all
form of the
on
all
on
form of
on
Advertisement
Table of Contents
