SonicWALL SSL-R User Manual page 108

Interface Configuration Command Set
Use these commands to manage the speed and duplex settings of the specified Ethernet
interface on the current SSL device. Enter Interface Configuration mode by using the
configure command in Privileged mode. Specify an Ethernet interface to configure using
the interface command in Configuration mode.
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Command:
Availability:
Description:
Page 108 SSL-IA/SSL-R User's Guide
auto
Remote, Serial, Telnet
Sets the current Ethernet interface to autonegotiation, canceling any existing
forced duplex or speed setting.
duplex <full|half>
Remote, Serial, Telnet
Forces the current Ethernet interface to full or half duplex.
end
Remote, Serial, Telnet
Exits Interface Configuration mode and returns to Configuration mode.
help [command]
Remote, Serial, Telnet
Displays help information for the specified command, where command is the name
of the command. If you do not specify a command, help information is displayed
for all Interface Configuration commands.
speed <10|100>
Remote, Serial, Telnet
Forces the speed of the current Ethernet interface to 10 Mbps or 100 Mbps.