General Information; Introduction; Features; Warranty Information - Keithley 7002 Instruction Manual

1.1

Introduction

This section contains general information about the Model
7002 Switch System.
1.2

Features

1.3

Warranty Information

1.4 Manual Addenda
1.5 Safety Symbols and Terms
1.6 Specifications
1.7 Inspection
1.8 Optional Accessories
1.2 Features
Some important Model 7002 features include:
• High Density Switching  Up to 400 channels (or ma-
trix crosspoints) per mainframe using 10 switching
cards.
• Switching Cards  In addition to the switching cards
designed specifically for the Models 7001 and 7002 (i.e.
Models 7011, 7012, 7013 and 7014), you can use the
switching cards that were originally designed for the
Keithley Models 705 and 706 scanners.

General Information

• Analog Backplane  Can be used to internally connect
the rows or banks of a Model 701X series card installed
in one slot to the rows or banks Model 701X series
cards installed in the other slots.
• Close/Open or Scan  The Model 7002 can simply
close and/or open one or more channels, or scan
through a specified list of channels.
• Channel LED Display  The real-time LED display
monitors the state (closed or open) of all available
channels.
• Memory  Up to 500 channel patterns (pattern of open
and closed channels) and 10 customized instrument set-
ups can be saved in memory for later recall.
• IEEE-488 Bus  Bus operation conforms to the IEEE-
488.2 and SCPI standards.
• Trigger Link  New trigger concept to provide more
versatile and precise external triggering. This is in
addition to the standard in/out BNC external triggering
technique.
• An optional light pen provides point and click program-
ming from the front panel.
1.3 Warranty information
Warranty information is located on the inside front cover of
this instruction manual. Should your Model 7002 require
warranty service, contact the Keithley representative or au-
1
1-1